Using a Logitech RoomMate with an HDL310 system

The Logitech RoomMate and the Nureva^® HDL310 system can be combined to provide audio performance optimized for large meeting and learning environments.

Before starting

Set up the HDL310 system by following the steps in the getting started guide:

Get started with HDL310 systems

On the Logitech RoomMate

• Ensure the Logitech RoomMate is using the latest version of software and firmware

• Connect the USB cable from the HDL310 to any USB-A port on the RoomMate

• Connect an HDMI cable from the HDMI-out port of the RoomMate to the in-room display

• Go to Logitech CollabOS settings

  • Select Display and Audio

  • Click on Audio

  • Turn on External Audio and confirm the activation prompt

Note: The RoomMate will reboot and the settings will be applied.

Testing device audio

• Go to Logitech system settings

• Select Display and Audio

• Click on Audio

• Select Test speakers or Test microphones

  • Test the speakers and microphones using the equipment test tool at the bottom

• Exit the system settings and return to the conferencing application

Important: Confirm that Nureva audio is set as the default speaker and microphone device in the conferencing application.

Resources from Logitech

CollabOS Admin Guide

CollabOS Guide & Release Notes

Getting Started - RoomMate