HDX systems use Bluetooth® to connect the remote control as well as to stream Auracast™ broadcast audio. The Nureva® App and Nureva Console are used to manage the Bluetooth settings for the HDX system.
Attach the antenna
Before configuring Bluetooth, ensure the antenna is attached to the back of the system hub.
.png)
Enable the remote control
The remote control connection is enabled by default and the setting controls whether the HDX system hub can connect to the remote control.
Connect to the HDX system using the Nureva App or Nureva Console.
With Nureva Console, select the Room where the device is located before continuing with the steps.
Click on Settings.
Open the System settings menu and select Bluetooth.
Slide the toggle to turn the remote control on or off.
Turn on the remote control by sliding the toggle to the right.
Turn off the remote control by sliding the toggle to the left.
Disabling the connection disconnects the remote control from the system hub. To reconnect after re-enabling, press any button on the remote control — the button also performs its normal function at the same time.
Additional information
Using the HDX system remote control
Enable Auracast
Auracast is enabled using the Nureva App or Nureva Console. Applying changes to an active broadcast will temporarily interrupt the broadcast.
Connect to the HDX system using the Nureva App or Nureva Console.
With Nureva Console, select the Room where the device is located before continuing with the steps.
Click on Settings.
Open the System settings menu and select Bluetooth.
Slide the toggle to turn Auracast on or off.
Turn on Auracast by sliding the toggle to the right.
Turn off Auracast by sliding the toggle to the left.
Note: Applying changes to Bluetooth setting during an active broadcast will temporarily interrupt the broadcast.