Broadcasting Auracast audio from an HDX system

Prev Next

The Nureva® HDX system features Auracast™ broadcast audio to stream audio to multiple devices at the same time.

Once Auracast is enabled, the HDX system broadcasts the meeting audio, including remote participants and people in the room. Auracast-compatible listening devices within range can join without pairing.

The broadcast appears under its assigned name and is open to anyone unless a broadcast code (password) is set. The HDX room speakers keep playing, so in-room Auracast listeners hear both the speakers and the broadcast.

Privacy: Anyone within range who has a compatible device can listen to an unencrypted Auracast broadcast. For private meetings, turn on encryption to ensure only participants with the broadcast code can listen.

Enabling Auracast

Auracast is enabled using the Nureva App or Nureva Console. Applying changes to an active broadcast will temporarily interrupt the broadcast.

  1. Connect to the HDX system using the Nureva App or Nureva Console.

    • With Nureva Console, select the Room where the device is located before continuing with the steps.

  2. Open Settings and select Bluetooth®.

  3. Select Auracast.

  4. Slide the toggle to turn Auracast on or off.

  5. Press Go to Auracast to advance to configuration.

Configuring Auracast

  1. Connect to the HDX system using the Nureva App or Nureva Console.

    • With Nureva Console, select the Room where the device is located before continuing with the steps.

  2. Open Settings and select Auracast.

  3. Select the pencil icon on the page to:

    • Change the broadcast name

    • Turn encryption on or off

    • Change the broadcast code (when encryption is enabled)

    • Adjust the audio quality

Note: Applying changes to an active broadcast will temporarily interrupt the broadcast.

Broadcast encryption

An Auracast broadcast can be open or encrypted. An open broadcast needs no password, while an encrypted one requires a broadcast code (passcode or password) that can be entered.

A broadcast code must be 4–16 characters long. Longer codes are harder to crack, and security researchers recommend using the full 16 characters. Encryption suits private sessions such as corporate meetings and legal or medical proceedings. The code can be shared with intended listeners outside the broadcast, for example on printed signage or a QR code, and should be changed on a regular schedule.

Audio quality settings

The audio quality setting controls how much of the sound range the Auracast broadcast carries and which listening devices can receive it. The default setting, 24 kHz, suits most rooms.

Audio quality options

16 kHz – Voice optimized: Carries the speech range only. Suited to broadcasts that are mostly speech, such as meetings and lectures.

24 kHz – Hearing aid compatible (default): Carries speech with more clarity in the upper range. Works with Auracast hearing aids and other Auracast-compatible listening devices. This is the recommended setting for hearing aids.

48 kHz – High-quality media (low compatibility): Carries the full sound range for music and video. Many hearing aids can’t receive a 48 kHz broadcast, so listeners using them may not be able to find or join it.

The 16 kHz and 24 kHz settings use smaller data packets than 48 kHz. As a result, they typically reach slightly farther and hold up better against wireless interference.


The Auracast™ word mark and logos are trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Nureva Inc. is under license. Other trademarks and trade names are those of their respective owners.