Voice Amplification Mode — HDL300 system

With Voice Amplification Mode, the Nureva^® HDL300 system is connected to a wireless headset microphone. The presenter wearing the headset will then have an amplified voice in the room. The HDL300 system’s full-room audio pickup continues to ensure that remote participants clearly hear all voices from the meeting room or classroom.

Why use Voice Amplification Mode?

Hearing a presenter clearly can be challenging even for in-room participants — especially those sitting at the back of the room. With Voice Amplification Mode, the in-room experience is improved for both participants and presenters while still providing an excellent audio experience for remote attendees.

With Voice Amplification Mode

• In-room participants can hear the presenter amplified clearly through the HDL300 speakers.

• Remote participants can hear the presenter and in-room participants clearly through the UC&C application, thanks to the full-room audio pickup provided by the HDL300 system.

• The presenter and participants can be recorded with the UC&C application or lecture capture solution.

Note: Only the voice of the person wearing the headset microphone will be amplified in the room.

Required before starting

1. Confirm the HDL300 system has the latest firmware.

   • Firmware version 1.3.167797 is the minimum required to enable voice amplification.

2. Enroll the HDL300 system into Nureva Console cloud to enable remote management.

Learn how to update HDL300 firmware

Learn how to enroll a HDL300 system into Nureva console

Which microphone systems can I use?

Headset and earset microphone systems are supported for use with Voice Amplification Mode. Lavalier, lapel, pendant and handheld microphone systems are not currently supported. Users should verify with the microphone manufacturer that their microphone system and transmitter are compatible.

Explore set-up instructions for the HDL300 system

Review voice amplification mode FAQs