By connecting a USB cable from the system hub to a computer, an IP over USB connection to the app is available as an alternative to accessing the over a local area network.
Important
If an HDX device that has been managed locally is switched to remote management over a network, the device settings will return to default settings and may need to be readjusted.
Connect the system hub to the computer
The HDX system can be managed through a USB connection to the meeting room computer only if the system hub is not connected to a network.
Connect the provided USB cable to the USB-C port on the HDX system hub.
Plug the USB cable into a USB-A port on the computer.
Use a USB-A to USB-C adapter if the computer does not have a USB-A port.
Open a supported browser and enter the IP address.
Chrome and Safari browsers are supported.
Use 169.254.253.253 if a static IP address has not been set.
Enter the enrollment code if prompted.
If a password has been set, use this instead of the enrollment code.
Click Continue and the Nureva App home page will open.
The HDX system can now be setup and managed from the connected computer.