CV30 camera automated tracking explained

The CV30 camera features automated tracking that uses the 4K image sensor, 84O field of view (FOV) and electronic pan, tilt, zoom (ePTZ) capability to maintain the view of the presenter in the room. The presenter can move freely around the front of the room, creating an enriched experience for the remote participants.

Tracking OFF	Tracking ON
The camera view is fixed or controlled by the remote.	The camera view will automatically adjust to maintain the view of the presenter.

Using tracking

Pressing the tracking button on the remote will turn the tracking feature on. Adjustments can be made to the zoom level, area and mode through the on-screen display menu. The default settings for tracking are:

• Automated: Off

• Zoom level: Medium

• Area: Full

• Mode: Auto

Depending on the tracking mode, one person or multiple people in the view will be tracked at a time. The camera view will zoom, pan or tilt to track the selected people. When there is nobody in the tracking area the camera will zoom out to the full view.

Please see the articles below for more information about using the remote control, setting tracking modes and adjusting the tracking area.

Get started with the CV30 camera

Adjusting the CV30 camera tracking modes

In scenarios where the presenter would like to move throughout the room and provide a more engaging environment, allow the camera to track the primary presentation area. This creates a dedicated presentation view for the remote participants as well as a more fluid and less restrictive experience

For scenarios when the local and remote participants need to focus solely on a dedicated area, pressing any of the preset camera buttons on the remote (1, 2 or 3) will stop tracking and switch to the specific preset view. Tracking can easily be enabled again by pressing the tracking buttons on the remote.

Turning on and off automated tracking

Automated tracking can be turned on or off with the remote control, or through the on-screen display (OSD) menu.

Using the remote control

• Press the Tracking button on the top, right corner of the remote to turn on/off tracking.

• Press the Home button on the remote to return the camera to full view.

How to adjust a CV30 camera

Through the OSD menu

1. Open an application that accesses the camera.

2. To view the on-screen display (OSD) the camera must be active.

3. If there are multiple cameras connected to the computer, ensure that the CV30 is active.

4. Once the application launches the camera view should be visible.

5. Press Menu on the remote to launch the OSD menu.

   • Navigate to Tracking and press the Home button on the remote to enter the tracking settings.

   • Navigate to Automated.

   • Use the right/left arrows on the remote control to turn on/off automated tracking.

   • Press the Menu button to exit the OSD or select Back from the menu to return to the main OSD menu.

Tracking ON and OFF

Press Menu on the remote to launch the onscreen display, then navigate down to the settings.

• Press the tracking button again on the remote to turn off tracking and return the camera to the full view.

• Press any of the preset buttons if presets have been defined.

• Press the home button on the remote will return the camera to the full view.