Preparing to install an HDL410 system

  • Updated on Jun 6, 2024
  • Published on Jun 6, 2024
Prev Next

Installing the Nureva® HDL410 system on a wall is a simple process that can take less than 60 minutes, with no special skills required. From where and how to mount the integrated microphone and speaker bars to running the Ethernet cables to making the final connections and accessing our management software, this article will help get you up and running in no time.

What’s included

The HDL410 system comes in two boxes. The first box contains the main system components. The other box includes the second microphone and speaker bar.

Box 1

Box 2

  • Microphone and speaker bar

  • Connect module

  • Connect module mounting bracket

  • USB-A to USB-B cable

  • CAT6 Ethernet cable

  • Power supply

  • Country-specific power cable

  • Remote control with AAA batteries

  • Microphone and speaker bar

  • CAT6 Ethernet cable

Additional tools and hardware

A few tools and some additional hardware are required to complete the installation.

  • Ladder

  • Tape measure

  • Level

  • Screwdriver

  • Power drill/driver

  • Wall anchors (#10 pan head or M5 pan head)

  • Screws (#10 pan head or M5 pan head)

Microphone and speaker bar placement

The HDL410 microphone and speaker bars are designed for quick and easy installation. However, keep in mind the following considerations:

Microphone clearance requirements and recommendations

How close to a ceiling can the HDL410 system be mounted?