Using a Logitech Rally Bar with the Dual HDL300 system
    • 07 Jun 2024
    • PDF

    Using a Logitech Rally Bar with the Dual HDL300 system

    • PDF

    Article summary

    The Logitech® CollabOS version 1.11 significantly enhances collaboration capabilities for the Nureva® Dual HDL300 system by introducing support in Microsoft® Teams Rooms mode. Previously, this support was limited to Zoom Rooms mode.

    Before starting

    Set up the Dual HDL300 system by following the steps in the get started guide:

    Get started with the Dual HDL300 system

    On the Logitech Rally Bar

    1. Connect the USB cable from the Dual HDL300 to any USB-A port on the Logitech Rally Bar.

    2. Connect an HDMI cable from the HDMI-out port of the Rally Bar to the in-room display.

    3. In the Logitech Settings page:

      • Go to Display and Audio.

      • Advance to Audio.

      • Select External Audio.

    Zoom Rooms

    When using Zoom Rooms, go to the Zoom Settings page and ensure the speaker and microphone are set to Nureva Audio.

    Microsoft Teams Rooms

    When using Microsoft Teams Rooms, the microphone and speaker settings will automatically default to Nureva Audio when the Dual HDL300 system is connected.

    Good to know

    Bring-your-own devices

    BYOD mode for the Logitech Rally Bar does not support external audio or video devices at this time.

    Logitech Sight cameras

    If a Logitech Sight device is connected to the Rally Bar, the cameras in the Sight will be disabled when external audio is enabled. However, the main camera in the Rally Bar will continue to function.

    Nureva audio system mute

    During an audio or video conference call, the audio volume and mute functions can be accessed using the Nureva remote control, the Rally Bar or a Logitech Tap touch controller.

    Was this article helpful?