Using a Logitech Rally Bar Mini with the HDL310 system
    • 07 Jun 2024
    • PDF

    Using a Logitech Rally Bar Mini with the HDL310 system

    • PDF

    Article summary

    The Logitech® CollabOS version 1.11 significantly enhances collaboration capabilities for the Nureva® HDL310 system by introducing support in Microsoft® Teams Rooms mode. Previously, this support was limited to Zoom Rooms mode.

    Before starting

    Set up the HDL310 system by following the steps in the get started guide:

    Get started with the HDL310 system

    On the Logitech Rally Bar Mini

    1. Connect the USB cable from the HDL310 to any USB-A port on the Logitech Rally Bar Mini.

    2. Connect an HDMI cable from the HDMI-out port of the Rally Bar Mini to the in-room display.

    3. In the Logitech Settings page:

      • Go to Display and Audio.

      • Advance to Audio.

      • Select External Audio.

    Zoom Rooms

    When using Zoom Rooms, go to the Zoom Settings page and ensure the speaker and microphone are set to Nureva Audio.

    Microsoft Teams Rooms

    When using Microsoft Teams Rooms, the microphone and speaker settings will automatically default to Nureva Audio when the HDL310 system is connected.

    Good to know

    Bring-your-own devices

    BYOD mode for the Logitech Rally Bar Mini does not support external audio or video devices at this time.

    Logitech Sight cameras

    If a Logitech Sight device is connected to the Rally Bar Mini, the cameras in the Sight will be disabled when external audio is enabled. However, the main camera in the Rally Bar Mini will continue to function.

    Nureva audio system mute

    During an audio or video conference call, the audio volume and mute functions can be accessed using the Nureva remote control, the Rally Bar Mini or a Logitech Tap touch controller.


    Was this article helpful?