Documentation Index

Fetch the complete documentation index at: https://support.nureva.com/llms.txt

Use this file to discover all available pages before exploring further.

Integration guide — Auracast transmitters and Nureva systems

Prev Next

Auracast™ transmitters can be used with the Nureva® HDL300, Dual HDL300, HDL310 and HDL410 audio systems. Nureva has tested and validated the Auracast transmitters listed below. These devices meet our standards for audio quality and reliability. Using Auracast transmitters that have not been validated with Nureva devices may result in reduced audio quality due to increased latency and dropped data packets. All Auracast transmitters validated by Nureva support password protection.

Auracast transmitters

Brand

Description

Model

Product web page

Bettear

Auracast transmitter

CASTER

www.bettear.com/products/caster

Avantree

Auracast transmitter

Oasis Aura

www.avantree.com/products/oasis-aura

Listen Technologies

2 channel Auracast transmitter

AURI-TX2N

www.listentech.com/shop/product/auri-tx2n-transmitter/

Setting up the auxiliary ports

The HDL300, Dual HDL300, HDL310 and HDL410 audio systems have mono unbalanced auxiliary ports on the connect module for connecting to Auracast transmitters.

Using the auxiliary ports on the HDL300 and Dual HDL300 systems

Using the auxiliary ports on an HDL310 system

Using the auxiliary ports on an HDL410 system

Note:

When using third-party cables, ensure the cable meets the applicable country, regional and local electrical codes or ordinances relating to that type of cable and related accessories.

Connecting an Auracast transmitter

To use an Auracast transmitter with a Nureva audio system:

  1. Connect one end of the audio cable to the auxiliary output port on the Nureva system’s connect module.

  2. Connect the other end of the cable to the audio input on the Auracast transmitter.

  3. Complete the device setup for the Nureva audio system using Nureva Console or the Nureva App.

Note:

The type of input port on the Auracast transmitter may vary by manufacturer and model. Refer to the transmitter manufacturer’s documentation to confirm the correct input and cabling requirements.


The Auracast™ word mark and logos are trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Nureva Inc. is under license. Other trademarks and trade names are those of their respective owners.