Get started with the HDL200 system

Step 1: Install the HDL200

Review the HDL200 system’s installation guide before installing the device. Important considerations such as the placement of the HDL200 system and required materials are outlined in the guide.

HDL200 installation guides

Step 2: Connect the HDL200

1. Connect the provided USB cable to the USB-B port on the HDL200.

2. Run the cable to the in-room computer, connecting to a USB-A port.

3. Join together the provided power cord with the power supply.

4. Connect the power supply to the HDL200 and plug it into a power source.

After the device is connected and switched on

Next, the HDL200 system will automatically calibrate. Please remain quiet in the room until calibration is complete.

• When calibration has been completed, launch Nureva Console client.

Enable remote management

The HDL200 system will be automatically detected by Nureva Console client. If the system is not detected, check the USB and power connections.

1. To begin, click the Manage remotely button in the blue banner.

2. Click the Enable remote management button at the bottom of the window.

Step 3: Create an account or sign in

For an existing account, choose Sign in and advance to Step 4: Enroll the HDL200 system.

1. Click the Create account link at the bottom of the page.

2. Enter your email address, provide first and last names and then create a password.

3. Agree to the Nureva Software License and General Terms.

4. Opt in or out of product and service emails.

5. Click the Create account button.

Check email inbox for the verification email. If the email is not in the inbox, look in the junk or spam folder.

1. Verify the email address by clicking the Verify link in the email.

2. Sign in to your account from the sign-in page.

3. On the first time that you sign in, enter your organization’s name and click Create to create your organization.

Step 4: Enroll the HDL200 system

When Nureva Console cloud launches for the first time, no devices will have been enrolled. To make the connection to the hardware and be able to manage it online, an enrollment code is required.

1. Click Enroll device to begin device enrollment.

2. If you have closed the Nureva Console client window, relaunch the client and click Manage remotely.

Step 5: Generate and copy enrollment code

1. Click the Generate enrollment code button in the desktop client.

2. Click the Enroll device button in the desktop client.

3. Return to the browser window and paste the enrollment code into the Enter code box in the cloud application.

4. Click Next and select Allow from the pop-up in your browser to continue.

Step 6: Provide room details (optional)

1. Enter some room details such as the room name, type, capacity and tags.

2. Click Save and the HDL200 system should now appear in the device list.

Step 7: Update firmware

Nureva Console indicates if a firmware update is available in the Firmware version column of the dashboard. If Update available is shown, proceed with the update. When completed, the new firmware version will be visible.

• Click on the three dots in the Actions menu and select Update firmware.

A confirmation dialog will appear to acknowledge that the device will not be available during the update process. Do not turn off the computer or unplug or disconnect the device until the update is complete.

• Click Update to continue.

The HDL200 system is now set up and ready for a test call.

Warnings and other considerations

Installing the HDL200 microphone and speaker bar in the positions listed below may cause overheating.

• Do not install the HDL200 on tables, credenzas, countertops or other surfaces without using Nureva-approved accessories.

• Do not block vents on the HDL200, as this will impede airflow and lead to overheating.

• Ensure adequate space between all vents and other objects to promote airflow and cooling.

• Do not operate the HDL200 while it’s placed on its back surface (with speakers directed upwards), as this impedes airflow.