Using a MAXHUB C6530 with an HDL310 system

Pairing the MAXHUB^® C6530 interactive flat panel with the Nureva^® HDL310 system delivers an exceptional solution for large meeting spaces. Combining MAXHUB’s advanced 65-inch 4K interactive display with its computer module and Nureva’s superior audio technology enhances both visual and auditory clarity, ensuring every participant is seen and heard clearly.

Before starting

Set up the HDL310 system by following the steps in the get started guide:

Get started with the HDL310 system

MAXHUB C6530 interactive flat panel display

The MAXHUB C6530 includes a computer module with an open platform based on Windows^® 10 IoT. Any unified communications and collaboration (UC&C) platform supported on Windows can be installed.

Learn more

On the MAXHUB C6530

1. Connect the USB cable from the HDL310 system to the USB-A 2.0 (lowest) port on the side of the MAXHUB C6530.

2. In the UC&C platform’s Settings page, ensure the speaker and microphone are set to the HDL310.

Connecting the Nureva HDL310 to the USB-A 2.0 (lowest) port on the side of the MAXHUB C6530 is important. The MAXHUB C6530 has a bring-your-own-device (BYOD) feature that provides the option of using its built-in camera, screen and the Nureva HDL310 with BYOD. Connecting the Nureva HDL310 to any other USB-A port on the MAXHUB C6530 will mean the audio will work only with the computer module and not in BYOD mode.

For BYOD mode on the MAXHUB C6530

1. Connect a USB-C 3.1 Gen 1 cable to the additional device from one of the two USB-C ports on the front of the C6530.

2. On the additional device, set the default speaker and microphone to the HDL310.

Connection diagram