Using Barco ClickShare CX series with HDL200 systems
- 24 Apr 2024
- Print
- PDF
Using Barco ClickShare CX series with HDL200 systems
- Updated on 24 Apr 2024
- Print
- PDF
Article summary
Did you find this summary helpful?
Thank you for your feedback
Start remote meetings in seconds from your laptop with Barco® ClickShare and Nureva® audio. Together we make it easy and smooth to bring your own meeting (BYOM) to your collaboration spaces.
Before starting
Set up the HDL200 system by following the steps in the getting started guide:
Barco ClickShare CX-20
On the CX-20 unit
Connect an HDMI cable to the in-room display.
To use the system
Insert the ClickShare Button into a USB port on the laptop as part of the BYOM.
Start the wireless audio/video session by clicking the ClickShare Button.
Use the UC&C client of choice to start a meeting and share some content.
Note: When in a call, you can control the audio volume or mute from the laptop — there’s no need to use the remote control.
Barco ClickShare CX-30 Gen1
On the CX-30 Gen1 unit
Connect an HDMI cable to the in-room display.
To use the system
Insert the ClickShare Button into a USB port on the laptop as part of the BYOM.
Start the wireless audio/video session by clicking the ClickShare Button.
Use the UC&C client of choice to start a meeting and share some content.
Note: When in a call, you can control the audio volume or mute from the laptop — there’s no need to use the remote control.
Barco ClickShare CX-30 Gen2
On the CX-30 Gen2 unit
Connect the USB cable from the HDL200 connect module to the front USB-A port of the CX-30 Gen2 unit.
Connect an HDMI cable to the in-room display.
Tip: The front USB-C port can also be used, but a USB-A to USB-C adapter will be needed.
To use the system
Insert the ClickShare Button into a USB port on the laptop as part of the BYOM.
Start the wireless audio/video session by clicking the ClickShare Button.
Use the UC&C client of choice to start a meeting and share some content.
Note: When in a call, you can control the audio volume or mute from your laptop — there’s no need to use the remote control.
Barco ClickShare CX-50 Gen1
On the CX-50 Gen1 unit
Connect the USB cable from the HDL200 to the rear USB-C port on the CX-50 Gen1 unit. You will need a USB-A to USB-C adapter.
Connect a USB-A cable to the in-room camera.
Connect an HDMI cable to the in-room display.
To use the system
Insert the ClickShare Button into a USB port on the laptop as part of the BYOM.
Start the wireless audio/video session by clicking the ClickShare Button.
Use the UC&C client of choice to start a meeting and share some content.
Note: When in a call, you can control the audio volume or mute from your laptop — there’s no need to use the remote control.
Barco ClickShare CX-50 Gen2
On the CX-50 Gen2 unit
Connect the USB cable from the HDL200 to the rear USB-C port on the CX-50 Gen 2 unit. You will need a USB-A to USB-C adapter.
Connect a USB cable to the in-room camera.
Connect an HDMI cable to the in-room display.
To use the system
Insert the ClickShare Button into a USB port on the laptop as part of the BYOM.
Start the wireless audio/video session by clicking the ClickShare Button.
Use the UC&C client of choice to start a meeting and share some content.
Note: When in a call, you can control the audio volume or mute from your laptop — there’s no need to use the remote control.
Additional resources
Need help with setting up the ClickShare Conference (CX-20/30/50) for the first time? Barco provides a comprehensive manual with detailed instructions to help make your setup successful.
The technical information in this article, including specifications and recommendations, is provided for customer convenience. The accuracy of this information is not guaranteed and is subject to change without notice. Please check the user manuals and related documentation from each product manufacturer to ensure that your setup meets the proper recommendations.
Was this article helpful?