Power cycling a Nureva® audio system is a great first step in troubleshooting. To complete a power cycle, follow the steps below.
Power cycle the microphone and speaker bars
Unplug the Ethernet cables from both RJ45 ports on the back of the connect module and then plug them back in.
Power cycle the whole system
Unplug the AC power adapter cable from the port on the back of the connect module. Wait about 10 seconds before plugging it back in.
Overheating warning
Indicator | Description |
|---|---|
| Solid red: The connect module has overheated and needs to be shut down.
|
Power cycle the connect module
Unplug the AC power adapter cable from the port on the back of the connect module. Wait a minimum of 10 minutes before plugging it back in.
Prevent overheating
Do not block the vents on the top, bottom or back of the connect module.
Ensure adequate space between all vents and other objects (a minimum of 2" or 5 cm) to promote airflow and cooling and to keep the circuits from overheating.
Avoid locations where ambient air reaches temperatures greater than 40° C.
Avoid installing the connect module in a confined space.
Avoid rack mounting the device.
Avoid installing the connect module close to other devices that generate heat.
The connect module requires a minimum of 2" (5 cm) clearance for airflow around the vents to avoid overheating.