Using a Logitech Rally Bar Mini with the HDL200 system

The Logitech^® CollabOS version 1.11 significantly enhances collaboration capabilities for the Nureva^® HDL200 system by introducing support in Microsoft^® Teams Rooms mode. Previously, this support was limited to Zoom Rooms mode.

Before starting

Set up the HDL200 system by following the steps in the get started guide:

Get started with the HDL200 system

On the Logitech Rally Bar Mini

1. Connect the USB cable from the HDL200 to any USB-A port on the Logitech Rally Bar Mini.

2. Connect an HDMI cable from the HDMI-out port of the Rally Bar Mini to the in-room display.

3. In the Logitech Settings page:

   • Go to Display and Audio.

   • Advance to Audio.

   • Select External Audio.

Zoom Rooms

When using Zoom Rooms, go to the Zoom Settings page and ensure the speaker and microphone are set to Nureva Audio.

Microsoft Teams Rooms

When using Microsoft Teams Rooms, the microphone and speaker settings will automatically default to Nureva Audio when the HDL200 system is connected.

Good to know

Bring-your-own devices

BYOD mode for the Logitech Rally Bar Mini does not support external audio or video devices at this time.

Logitech Sight cameras

If a Logitech Sight device is connected to the Rally Bar Mini, the cameras in the Sight will be disabled when external audio is enabled. However, the main camera in the Rally Bar Mini will continue to function.

Nureva audio system mute

During an audio or video conference call, the audio volume and mute functions can be accessed using the Nureva remote control, the Rally Bar Mini or a Logitech Tap touch controller.