Integration guide — Nureva HDL310 and Owl Labs Meeting Owl 3
    • 31 Mar 2025
    • PDF

    Integration guide — Nureva HDL310 and Owl Labs Meeting Owl 3

    • PDF

    Article summary

    The integration of the Nureva® HDL310 system and the Meeting Owl® 3 by Owl Labs offers a seamless and versatile solution for a variety of meeting spaces.

    Before starting

    Set up the HDL310 system by following the steps in the get started guide:

    Get started with HDL310 system

    On the Meeting Owl 3

    1. Connect the included power cable to the Meeting Owl 3.

    2. Connect the included USB-C cable from the Meeting Owl 3 to the host device.

    On the Nureva HDL310

    1. Connect the included power cable to the Nureva HDL310.

    2. Connect the included USB cable from the HDL310 to the host device.

    On the host device

    1. Go to the UC&C client’s settings page.

    2. Set the default camera to the Meeting Owl 3.

    3. Set the default microphone and speaker to Nureva audio.

    Resources from Owl Labs

    Owl Labs support page

    The technical information in this article, including specifications and recommendations, is provided for customer convenience. The accuracy of this information is not guaranteed and is subject to change without notice. Please check the user manuals and related documentation from each product manufacturer to ensure that your setup meets the proper recommendations.


    Was this article helpful?