Integration guide — Nureva Dual HDL300 and MAXHUB WB05

The Nureva^® Dual HDL300 system integrates well with the MAXHUB^® Screen Sharing Box WB05 to improve meeting start-up times, participant engagement and meeting room productivity. The MAXHUB WB05 adds wireless bring your own meeting (BYOM) connectivity to meeting rooms. With this integration, there is also the option of adding the MAXHUB Wireless Screen Sharing Dongle WT13.

Before starting

Set up the Dual HDL300 system by following the steps in the get started guide:

Get started with the Dual HDL300 system

On the Nureva Dual HDL300

1. Connect the included power cable to the Nureva Dual HDL300.

2. Connect the included USB Type A-B cable from the Dual HDL300 to a USB-A port on the MAXHUB WB05.

On the MAXHUB WB05

1. Connect the included power cable to the MAXHUB WB05. The MAXHUB WB05 also supports Power over Ethernet (PoE).

2. Connect an Ethernet cable from the MAXHUB WB05 to the network.

3. Connect an HDMI cable from the HDMI-out of the MAXHUB WB05 to the display.

4. Optional: Connect the MAXHUB Wireless Screen Sharing Dongle WT13 to the BYOD device. The Dual HDL300 and the MAXHUB WB05 are compatible with or without the WT13 (which is optional).

Syncing of the mute function between the Dual HDL300 and the connected device is not supported. For the best experience, we recommend using the mute controls in the UC&C platform.

Resources from MAXHUB

MAXHUB support page

The technical information in this article, including specifications and recommendations, is provided for customer convenience. The accuracy of this information is not guaranteed and is subject to change without notice. Please check the user manuals and related documentation from each product manufacturer to ensure that your setup meets the proper recommendations.