Can the HDL300 system be cleaned and disinfected?

Yes, the Nureva^® HDL300 system can be cleaned and disinfected. We recommend using a soft, dry, lint-free cloth when cleaning the system.

Cleaning materials

• A soft-fiber, lint-free cloth

• A solution made of 70% isopropyl alcohol

• Cleaning wipes with a minimum alcohol concentration of 70%

Guidelines — HDL300 system

1. Before starting, power off the HDL300 system by disconnecting the power cable.

2. Be aware that early models of the HDL300 system were coated with a softer paint that may rub off or discolor slightly. HDL300 systems with serial numbers starting with AG (AGxxxXxxXxxxxx) have the softer coating.

3. Spray the cleaning solution onto the soft-fiber cloth until it’s damp.

4. Start by test-cleaning in a small, inconspicuous area to ensure the cleaner does not cause the paint to rub off or discolor.

5. Gently wipe the non-porous exterior surfaces using the soft-fiber cloth.

6. Gently wipe cables using the cleaning wipes.

7. Wait for the system and cables to air-dry before connecting the power cable and powering the system.

Important

• Be careful when cleaning near fabric-covered areas.

• Avoid getting liquid onto fabric-covered areas.

• Do not spray the cleaning solution directly onto the audio system or its components.

• Do not use any solvents, harsh chemicals, ammonia cleaners or abrasive cleaners.

• Keep moisture to a minimum and avoid spilling or dripping liquid into any openings.

• Cleaning the system more than five times a day may damage the surface.

Guidelines — remote control

1. Remove the batteries from the remote control before starting.

2. Spray the cleaning solution onto the cloth until it is damp.

3. Start by test-cleaning in a small, inconspicuous area to ensure the cleaner does not damage the surface.

4. Gently wipe the remote control surfaces, including the buttons.

5. Allow the remote control to air-dry completely before replacing the batteries.

Important

• Keep moisture to a minimum and avoid spilling liquid on the remote control.

• Avoid using excessive force when cleaning the remote control buttons.

• Cleaning the remote control more than five times a day may cause damage.

Warning

Using germicidal disinfectant wipes to clean and disinfect the audio system surfaces may cause visible and/or functional damage after repeated use.