Popular topics: Downloads Can I connect my computer wirelessly to the projector? HDL300 system installation guide Download Room Manager Room Manager features overview ► WM408i installation guide and drawings ► HDL300 system integration guide Microphone clearance requirements and recommendations More download options Does the HDL300 system work with audio conferencing (UC&C) software? Using the auxiliary ports on the HDL300 system Span Workspace technical requirements Installation guides and drawings Getting started with your HDL300 system HDL300 and Dual HDL300 system connection diagrams Installing a Dual HDL300 system Is the HDL300 system compatible with the Cisco® SX80? Can I switch between a single HDL300 and Dual HDL300 system? Copying and pasting onto the canvas Setting up Jira® for Span Workspace ►

Set up the touch driver for the WM210i and WM307i systems

To calibrate touch on your WM210i or WM307i system, follow the steps below.

  1. Click on the touch icon from your desktop toolbar to launch the menu

  1. Select the hand icon at the top
  2. Click Matching. The screens will flash a series of dots.
  3. Click OK when the matching has completed

  1. Click Touch Area Settings and choose Auto from the drop-down menu. The screens will flash a series of dots. Click OK when the touch area has completed.

  1. Click Calibration and choose Manual from the drop-down menu. A target will appear on the screen. Press and hold the cross hair in the center until it changes to a darker color. Release the target and follow it to the next location on the screen. Repeat the process until the calibration is complete.

Once the touch driver has been set up and touch has been calibrated, all re-calibration is done through the setup center.

Last udpated: June 5, 2018

Was this article helpful?

Can’t find what you’re looking for?

Contact Support