Is the HDL300 system compatible with SMART SRS solutions?

Yes. Connecting the HDL300 system with SMART SRS, models 8084i or 8055i, is as simple as connecting the two systems and re-configuring the default audio device. Follow the instructions below to learn how.


Connecting the systems

Connect the HDL300 system's connect module USB cable to one of the USB-A ports on the AM70-L appliance on a SMART SRS system.


Configuring the default audio device

  1. Reboot the SMART SRS device and log in as an administrator
  2. Go to System Settings → Network Connections
  3. The popup window that appears will have an address bar at the top. Replace the content in the address bar with the following Windows command:
mmsys.cpl
  1. Press [Enter]. The Sound control pop-up window will appear.
  2. Within the sound control panel, select Echo Cancelling Speakerphone (HDL300) and make it the default audio "Playback" and "Recording" devices
  3. If available, also make Echo Cancelling Speakerphone (HDL300) the "Default communication device"
  4. Click Apply
  5. Click OK
  6. Reboot the system and log in normally


Your SMART SRS system will now use the HDL300 as the default device for all UC&C conference calls and/or media playback.


NOTE: As with all iFP integrations, be sure to mount the HDL300 in accordance with the microphone clearance requirements as specified in the HDL300 Quick Start Guide.


Last updated: September 3, 2019

Was this article helpful?

Can’t find what you’re looking for?

Contact Support

1.844.370.2111