---
title: "Using HDL310 systems with Dante solutions | Nureva support"
slug: "using-nureva-audio-with-dante-hdl310"
description: "Discover how Nureva audio systems with auxiliary in and out ports seamlessly integrate with standard off-the-shelf Dante adapters."
tags: ["Integration", "Pro series", "Connections", "HDL410 system", "Ecosystem"]
updated: 2024-07-05T19:31:31Z
published: 2024-07-05T19:31:31Z
canonical: "support.nureva.com/using-nureva-audio-with-dante-hdl310"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.nureva.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Using HDL310 systems with Dante audio network solutions

Nureva has determined that standard off-the-shelf Dante® adapters work with Nureva® audio systems that offer auxiliary in and out ports.

> [!NOTE]
> ## **Before starting**
> 
> - Confirm that the HDL310 system is compatible with the third-party hardware
> - Set up the HDL310 according to the [Get started guide](https://support.nureva.com/docs/get-started-with-the-hdl310-system)

## Adjust settings in Nureva Console

1. Go to the **Device** dashboard.
2. Scroll down to **Auxiliary ports** and open the menu.
3. Change the setting to **Mic level**.

When the settings adjustments are completed, the USB cable between the connect module and the computer can be removed.

## Unbalanced signal solution

A Dante audio network can be connected to a Nureva audio system by connecting the auxiliary in and out ports on the connect module to the stereo output and input, respectively. Low noise and low distortion are key to how well the system performs. Nureva recommends the [RDL® SYSFLEX® SF-BNC2](https://rdlnet.com/product/sf-bnc2/) bidirectional network converter.

![HDL310 unbalanced](https://cdn.document360.io/1ff82979-b9bd-4d03-9c0e-683bae60b79a/Images/Documentation/HDL310%20unbalanced.jpg)

## Balanced signal solution

The HDL310 system is also compatible with balanced audio systems using different off-the-shelf converters. Nureva has tested this solution with the [Dante AVIO™ AES3](https://www.getdante.com/products/adapters/dante-avio-adapters/) two-channel analog input adapter. Nureva recommends the [Rolls MB15b Promatch line converter](https://www.rolls.com/product/MB15b) (3.5 mm/XLR) for stereo-balanced line-level control.

![HDL310 balanced](https://cdn.document360.io/1ff82979-b9bd-4d03-9c0e-683bae60b79a/Images/Documentation/HDL310%20balanced.jpg)

## Auxiliary port signals

The Nureva aux-in and aux-out connections are single-ended, unbalanced signals with default maximum output signals as given in the table below. Any equipment requiring voltages below these levels may result in clipping, distortion, and in extreme cases, damage to connected systems. The HDL310 system’s output signal will not adequately drive equipment requiring voltages above these levels and may result in quiet audio or no audio on the channel. Before connecting to the Nureva connect module, ensure the third-party device voltage levels are adequate or adjusted properly with the additional interfacing hardware.

| Auxiliary ports | VRMS | Gain |
| --- | --- | --- |
| Aux out (mic level) | Max 0.23 VRMS (0.65 Vp-p)* | -10.5 dBu |
| Aux out (line level) | Max 0.92 VRMS (2.60 Vp-p)* | +1.5 dBu |
| Aux in | Max 1.00 VRMS (2.83 Vp-p) | +2.2 dBu |
|  | ** Assumes a 10k Ohm load* |  |

The technical information in this article, including specifications and recommendations, is provided for customer convenience. The accuracy of this information is not guaranteed and is subject to change without notice. Please check the user manuals and related documentation from each product manufacturer to ensure that your setup meets the proper recommendations.