The Nureva® Dual HDL300 system works seamlessly with the AudioCodes RXV200 compute and RX-PAD controller. The integration delivers Microsoft® Teams Rooms on Android™ devices to a variety of meeting spaces.
Before starting
Set up the Dual HDL300 system by following the steps in the get started guide:
On the Nureva Dual HDL300
Connect the included USB cable to the USB-B port on the Dual HDL300 connect module.
Run the cable to the RXV200, connecting to a USB-A port.
Note: The RXV200 will be replacing the in-room computer.
On the AudioCodes RXV200
Connect the included power cable to the RXV200.
Connect an Ethernet cable from the RXV200 to the network.
Connect an HDMI cable from the HDMI-1 output to the in-room display. The RXV200 supports up to two displays.
On the AudioCodes RX-PAD
Connect the included power cable to the RX-PAD. The RX-PAD also supports Power over Ethernet.
Connect an Ethernet cable from the RX-PAD to the network.
Ensure that the Nureva Dual HDL300 is set as the default microphone and speakers in Microsoft Teams Rooms.