Using a direct Ethernet connection with the Nureva App

The Nureva^® App is a web-based companion app designed to enhance the setup and configuration of HDL310 and HDL410 systems, as well as manage a comprehensive range of audio device settings.

By connecting an Ethernet cable from a system’s connect module to a tablet, mobile phone or computer, a direct connection to the app is available as an alternative to accessing it over a local area network.

Before starting

Device enrollment code

When connecting to the app for the first time, the device enrollment code is needed. There are two ways to find the enrollment code:

1. The enrollment code can be found in Nureva Console. This information is available in the device dashboard, under the Hardware and networking section.

2. The enrollment code can also be found on the bottom of the connect module.

Items needed

• Tablet, mobile phone or computer and Ethernet cable.

  • If an Ethernet port is not included with the device, a USB to Ethernet adapter is needed.

  • Some mobile devices require a powered USB to Ethernet adapter.

• An HDL310 or HDL410 system.

  • The app is accessible with only the connect module. However, some features are only available when a complete system is connected.

Steps to connect

1. Connect the Ethernet cable to the network port on the connect module.

2. Plug the Ethernet cable into the tablet, mobile phone or computer.

3. Open a supported browser and enter the IP address.

   • Chrome™ and Safari^® browsers are supported.

   • Use 169.254.254.254 if a static IP address has not been set.

4. Enter the enrollment code if prompted.

   • If a password has been set, use this instead of the enrollment code.

5. Click Continue and the Nureva App home page will open.