Using an HDL310 with the AudioCodes RXV200 and RX-PAD

The Nureva^® HDL310 system works with the AudioCodes RXV200 compute and RX-PAD controller. The integration delivers Microsoft® Teams Rooms on Android™ devices to a variety of meeting spaces.

Note: Full interoperability with the HDL310 and HDL410 will be available with the upcoming firmware release in May 2025.

Before starting

Set up the HDL310 system by following the steps in the get started guide:

Get started with HDL310 system

On the Nureva HDL310

1. Connect the included USB cable to the USB-B port on the HDL310 connect module.

2. Run the cable to the RXV200, connecting to a USB-A port.

Note: The RXV200 will be replacing the in-room computer.

On the AudioCodes RXV200

1. Connect the included power cable to the RXV200.

2. Connect an Ethernet cable from the RXV200 to the network.

3. Connect an HDMI cable from the HDMI-1 output to the in-room display. The RXV200 supports up to two displays.

On the AudioCodes RX-PAD

1. Connect the included power cable to the RX-PAD. The RX-PAD also supports Power over Ethernet.

2. Connect an Ethernet cable from the RX-PAD to the network.

3. Ensure that the Nureva HDL310 is set as the default microphone and speakers in Microsoft Teams Rooms.

Resources from AudioCodes

RXV200 Microsoft Teams Rooms Quick Installation Guide

RXV200 User’s and Administrator’s Manual version 2.6