---
title: "Using a ScreenBeam 1100 Plus with a Dual HDL300 system"
slug: "screenbeam-1100-plus-with-dual-hdl300"
description: "The ScreenBeam 1100 Plus platform can be integrated with the Nureva Dual HDL300 system to deliver superior audio and wireless display capabilities providing enhanced collaboration in office and learning environments."
tags: ["Compatibility", "Dual HDL300 system", "Configuration", "Interoperability", "Device connection", "Prepare", "Ecosystem"]
updated: 2024-06-18T23:05:46Z
published: 2024-06-18T23:05:46Z
canonical: "support.nureva.com/screenbeam-1100-plus-with-dual-hdl300"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.nureva.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Using a ScreenBeam 1100 Plus with a Dual HDL300 system

The ScreenBeam® 1100 Plus platform can be integrated with the Nureva® Dual HDL300 system to deliver superior audio and wireless display capabilities — perfect for enhancing collaboration in office and learning environments.

> [!NOTE]
> ## Before starting
> 
> Set up the Dual HDL300 system by following the steps in the get started guide:
> 
> 
> 
> [Get started with the Dual HDL300 system](https://support.nureva.com/docs/get-started-with-the-dual-hdl300-system)

## On the ScreenBeam 1100 Plus

1. Ensure the ScreenBeam 1100 Plus has the latest version of the firmware.
  - **Firmware version** **11.1.15.6** or newer is required.
2. Connect the Dual HDL300 to the **USB 3.0** port on the back of the 1100 Plus.
3. Connect a USB camera to a USB-A port on the 1100 Plus.
4. Connect an HDMI cable from the HDMI-out port of the 1100 Plus to the in-room display.

> [!WARNING]
> **Important:** The Screenbeam USB Pro switch is currently not compatible with the Dual HDL300 system.

## On the in-room computer

1. Download and install the ScreenBeam Conference software.
2. Follow the steps shown on-screen to install the software.
3. Launch the ScreenBeam Conference software and connect to the ScreenBeam device.
4. In the conferencing platform’s audio settings, set the speaker and microphone as follows:
  - Speaker = Digital Output (ScreenBeam xxxx)
  - Microphone = In-Room Microphone (ScreenBeam Virtual Audio)

## Resources from ScreenBeam

[Downloads and documentation for the ScreenBeam 1100 Plus](https://www.screenbeam.com/support/screenbeam-1100plus/)

## Related

- [Setting up Dual HDL300 systems with Nureva Console client](/setting-up-dual-hdl300-systems-with-nureva-console-client.md)
- [Optimize the Dual HDL300 system settings](/optimize-dual-hdl300-system-settings.md)
- [Test a Dual HDL300 system’s speakers and microphones](/testing-dual-hdl300-speakers-microphones.md)