Recommended settings for Zoom communication solutions

Nureva^® audio systems can be configured to work with Zoom Meetings and Zoom Rooms by following the steps below.

Before starting

Set up the Nureva system by following the steps in the get started guide:

Get started with the HDL200 system

Get started with the HDL300 system

Get started with the Dual HDL300 system

Get started with the HDL310 system

Get started with the HDL410 system

Nureva audio systems that are Zoom certified

Setting the default device

To ensure the Nureva system is ready for conference calls, it must be set as the default audio and default communication device for playback and recording within the computer’s sound settings.

In Windows

Follow these steps to set a Nureva audio conferencing system as the default audio device for a Windows^® computer.

1. Click the speaker icon in the lower-right corner of the desktop.

2. Right-click Sound.

3. The sound settings window will open.

In Windows sound settings

Playback tab

1. Select Echo canceling speakerphone (Nureva audio). The product name might also be shown.

2. Open the Set default drop-down menu at the bottom of the panel.

3. Select Set as the default communication device.

4. Open the drop-down menu again.

5. Select Set as the default device.

Recording tab

1. Select Echo canceling speakerphone (Nureva audio). The product name might also be shown.

2. Open the Set default drop-down menu at the bottom of the panel.

3. Select Set as the default communication device.

4. Open the drop-down menu again.

5. Select Set as the default device.

Zoom & Zoom Rooms

Open Zoom audio settings

1. Launch Zoom on your computer.

2. Click on your profile picture in the upper-right corner.

3. In the drop-down menu, select Settings.

4. In the menu on the left, click Audio.

Select the Nureva device as the speaker (output)

1. In the Speaker section, click the drop-down menu.

2. Select the Nureva device as the preferred output device.

3. Click Test speaker to ensure audio plays through the correct device.

Select the Nureva device as your microphone (input)

1. In the Microphone section, click the drop-down menu.

2. Select the Nureva device as the preferred input device.

3. Speak into the microphone and check the Input Level bar to confirm it detects sound.

Enable Zoom background noise removal

1. Scroll down to the Audio Profile section.

2. Click Zoom Background Noise Removal to expand the options.

3. Select Auto to allow Zoom to intelligently filter out background noise while maintaining voice clarity.

4. Click Apply or simply close the settings window (Zoom saves changes automatically).

The Nureva audio device is now fully configured for Zoom meetings with optimized background noise removal.

The technical information in this article, including specifications and recommendations, is provided for customer convenience. The accuracy of this information is not guaranteed and is subject to change without notice. Please check the user manuals and related documentation from each product manufacturer to ensure that your setup meets the proper recommendations.