Preparing to install an HDL310 system
    • 06 Jun 2024
    • PDF

    Preparing to install an HDL310 system

    • PDF

    Article summary

    Installing the Nureva® HDL310 system on a wall is a simple process that can take less than 30 minutes, with no special skills required. From where and how to mount the integrated microphone and speaker bar to running the Ethernet cable to making the final connections and accessing our management software, this article will help get you up and running in no time.

    What’s included

    The HDL310 system comes in one box that contains the system components.

    • Microphone and speaker bar

    • Connect module

    • Connect module mounting bracket

    • USB-A to USB-B cable

    • CAT6 Ethernet cable

    • Power supply

    • Country-specific power cable

    • Remote control with AAA batteries

    Additional tools and hardware

    A few tools and some additional hardware are required to complete the installation.

    • Ladder

    • Tape measure

    • Level

    • Screwdriver

    • Power drill/driver

    • Wall anchors (#10 pan head or M5 pan head)

    • Screws (#10 pan head or M5 pan head)

    Microphone and speaker bar placement

    The HDL310 microphone and speaker bar is designed for quick and easy installation. However, keep in mind the following considerations:

    Microphone clearance requirements and recommendations

    How close to a ceiling can the HDL310 system be mounted?

    Was this article helpful?