How to adjust the sleep mode for the Dual HDL300 system
    • 14 Apr 2024
    • PDF

    How to adjust the sleep mode for the Dual HDL300 system

    • PDF

    Article summary

    To adjust the sleep mode for the Nureva® Dual HDL300 system, follow the steps below.

    1. With the Dual HDL300 connected to the computer, open Nureva Console client.

      • Nureva Console client will open at the welcome page.

    2. Select Continue.

      • The system information page will open.

    3. Select Device settings.

      • The device settings page will open.

    4. Select Auxiliary ports.

    5. Turn off sleep mode by sliding the toggle to the left.

      Turn on sleep mode by sliding the toggle to the right.

    Dual HDL300 sleep mode toggle


    Was this article helpful?