Using a DTEN D7 with an HDL300 system

The DTEN D7 meetings device can be paired with the Nureva^® HDL300 system to deliver superior audio and display capabilities — perfect for enhancing collaboration in office and learning environments.

Before starting

Set up the HDL300 system by following the steps in the get started guide:

Get started with the HDL300 system

On the DTEN D7

1. Ensure both the DTEN D7 firmware and Zoom version are up to date.

2. Connect the USB cable from the HDL300 to a USB-A port on the DTEN D7.

On the DTEN D7 Settings page

In the local Settings window, ensure the microphone and speaker are set to the HDL300.

Resources from DTEN

DTEN D7 support

The technical information in this article, including specifications and recommendations, is provided for customer convenience. The accuracy of this information is not guaranteed and is subject to change without notice. Please check the user manuals and related documentation from each product manufacturer to ensure that your setup meets the proper recommendations.