Preparing to install an HDL300 system

Installing the Nureva^® HDL300 system on a wall is a simple process that can take about 30 minutes, with no special skills required. From where and how to mount the integrated microphone and speaker bar to running the Ethernet cable to making the final connections and accessing our management software, this article will help get you up and running in no time.

What’s included

The HDL300 system comes in one box, which contains the following components:

• Microphone and speaker bar

• Connect module

• Connect module mounting bracket

• USB-A to USB-B cable

• CAT6 Ethernet cable

• Power supply

• Country-specific power cable

• Remote control with AAA batteries

Additional tools and hardware

A few tools and some additional hardware are required to complete the installation.

• Ladder

• Tape measure

• Level

• Screwdriver

• Power drill/driver

• Wall anchors (#10 pan head or M5 pan head)

• Screws (#10 pan head or M5 pan head)

Microphone and speaker bar placement

Review the HDL300 system installation guide before installing the device. Important considerations such as the placement of the microphone and speaker bar and required materials are outlined in the guide. 

HDL300 and Dual HDL300 installation guide

Microphone clearance requirements and recommendations

How close to a ceiling can the HDL300 system be mounted