Integration guide — Nureva HDL300 and Yealink MVC S90

The Nureva^® HDL300 audio system integrates seamlessly with the Yealink^® MVC S90 videoconferencing system, delivering pro audio performance in large Microsoft^® Teams Rooms. Please note that the divisible rooms feature offered by the MVC S90 has not been tested with the HDL300 system.

Before starting

Set up the HDL300 system by following the steps in the getting started guide:

Get started with HDL300 systems

Using the auxiliary ports on an HDL300 system

On the Yealink MVC S90

1. Connect the included power adapter to the MCore Pro mini PC.

2. Connect the MCore Pro mini PC to the network using the Ethernet port labeled Internet.

3. Connect the AVHub to the MCore Pro using the supplied USB cable.

4. Connect each UVC86 camera to the VCH ports on the AVHub.

5. Connect an HDMI cable from one of the MCore HDMI outputs to a display.

6. Connect the MTouch Plus touch panel console to the MCore Pro using the Ethernet port labeled MTouch.

7. Mount and power the RoomSensor. Then, in Yealink RoomConnect, go to MTouch Plus > Device Status > Sensor to pair it.

On the Nureva HDL300

USB connection

1. Connect the included power cable to the Nureva HDL300.

2. Connect the included USB-B to USB-A cable from the HDL300 to the Yealink MVC S90.

Analog connection using the 1/4" ports on the Yealink AVHub

You will need two 3.5 mm to 1/4" TRS cables for this option.

1. Plug the 3.5 mm end of the first cable into the line-in port on the HDL300.

2. Connect the 1/4" TRS end to the line-out port on the Yealink AVHub.

3. Plug the 3.5 mm end of the second cable into the line-out port on the HDL300.

4. Connect the 1/4" TRS end to the line-in port on the Yealink AVHub.

Analog connection using the RCA ports on the Yealink AVHub

You will need two 3.5 mm to RCA cables for this option.

1. Plug the 3.5 mm end of the first cable into the line-in port on the HDL300.

2. Connect the 1/4" TRS end to the line-out port on the Yealink AVHub.

3. Plug the 3.5 mm end of the second cable into the line-out port on the HDL300.

4. Connect the 1/4" TRS end to the line-in port on the Yealink AVHub.

Resources from Yealink

Yealink MVC S90 support page

The technical information in this article, including specifications and recommendations, is provided for customer convenience. The accuracy of this information is not guaranteed and is subject to change without notice. Please check the user manuals and related documentation from each product manufacturer to ensure that your setup meets the proper recommendations.