Integration guide — Nureva HDL200 and Owl Labs Meeting Owl 3

The integration of the Nureva^® HDL200 system and the Meeting Owl^® 3 by Owl Labs offers a seamless and versatile solution for a variety of meeting spaces.

Before starting

Set up the HDL200 system by following the steps in the get started guide:

Get started with HDL200 system

On the Meeting Owl 3

1. Connect the included power cable to the Meeting Owl 3.

2. Connect the included USB-C cable from the Meeting Owl 3 to the host device.

On the Nureva HDL200

1. Connect the included power cable to the Nureva HDL200.

2. Connect the included USB cable from the HDL200 to the host device.

On the host device

1. Go to the UC&C client’s settings page.

2. Set the default camera to the Meeting Owl 3.

3. Set the default microphone and speaker to Nureva audio.

Resources from Owl Labs

Owl Labs support page

The technical information in this article, including specifications and recommendations, is provided for customer convenience. The accuracy of this information is not guaranteed and is subject to change without notice. Please check the user manuals and related documentation from each product manufacturer to ensure that your setup meets the proper recommendations.