How to add or remove a camera

Videoconferencing cameras can be added to Nureva^® Console for remote monitoring. The CV30 camera has other management features available as well.

Add a Nureva CV30 camera

Nureva Console client auto-detects Nureva conferencing devices including the CV30 camera.

1. Ensure the CV30 camera is connected to the computer.

2. Open Nureva Console client. The CV30 camera will be detected and listed as a device.

Add a third-party camera

Nureva Console client supports the monitoring of many USB cameras. These third-party cameras are monitored alongside Nureva conferencing systems.

Note: A Nureva conferencing device must be connected to the computer and detected by Nureva Console client before a third-party camera is added.

1. Open Nureva Console client.

2. Confirm one or more Nureva conferencing systems are shown in Nureva Console client.

3. Press the camera icon button in the Devices list on the left.

4. When the panel opens, select the camera to be added in the drop-down list.

5. After a camera has been selected, the live camera view will be active in the preview area.

6. Press the Add button to bring the selected camera into the Nureva Console client device list.

After adding a camera, it will appear in the Devices list in Nureva Console client. Some basic camera information will also appear under the camera preview to help identify the camera hardware.

If the Nureva conferencing device in the room is enrolled in Nureva Console cloud, the third-party camera will automatically enroll after it has been added.

Note: Some third-party cameras may not be supported. An error notification will appear if a third-party camera cannot be added.

Remove a CV30 camera

When a CV30 camera is disconnected from the computer, it will automatically be removed from Nureva Console client. If the CV30 camera was enrolled in the cloud application, it will remain enrolled even after being disconnected. The CV30 will need to be removed from Nureva Console cloud separately.

1. Go to Nureva Console cloud and sign in.

2. Locate the room with the CV30 to be removed.

3. Click the three-dot menu for the CV30 camera.

4. Select Remove in the menu.

5. Click Remove in the pop-up notification.

After clicking Remove, a notification will confirm that the CV30 camera has been removed.

If the CV30 camera is removed from Nureva Console but remains connected to the computer, the CV30 will re-enroll automatically when the computer is restarted or the Nureva Console daemon is restarted.

Remove a third-party camera

To remove an enrolled third-party camera, it will need to be removed from both the desktop client and the cloud application. The order in which it is removed from these applications does not matter.

Remove a third-party camera from Nureva Console client

A third-party camera can easily be removed from Nureva Console client. In the Devices list, select the camera to be removed and, in the camera preview, press the Remove camera button.

The camera will be removed from Nureva Console client and can be added again at any time. If the camera was enrolled in Nureva Console cloud, removing it from the desktop client will cause the device status in the cloud application to change to Disconnected.

Remove a third-party camera from Nureva Console cloud

1. Go to Nureva Console cloud and sign in.

2. Select the room with the camera to be removed.

3. Click the three-dot menu for the camera.

4. Select Remove in the menu.

5. Click Remove in the pop-up notification.

After clicking Remove, a notification will confirm the third-party camera has been removed.

If the third-party camera is removed from Nureva Console cloud but is not removed from the desktop client, the camera will be re-enrolled into the cloud application automatically when the computer is next restarted or the Nureva Console daemon is restarted.