---
title: "Connecting HDL310 system components | Nureva support"
slug: "connecting-hdl310-system-components"
description: "Discover how to connect your Nureva HDL310 system components."
tags: ["Device connection", "Configuration", "HDL310 system", "Connect module", "Remote control", "Pro series", "Guide"]
updated: 2026-10-27T16:33:13Z
published: 2026-10-27T16:33:13Z
canonical: "support.nureva.com/connecting-hdl310-system-components"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://support.nureva.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Connecting the HDL310 system components

## Connect the HDL310 system

> [!NOTE]
> **Important!** The microphone and speaker bar connection ports on the back of the HDL310 connect module are designed for wired, single-room, on-premises connections only. They are not designed for inter-building links, or plenum runs between floors and must not be connected to a standard Ethernet network.

1. Connect the provided Ethernet cable to the RJ45-1 port on the connect module.
2. Run the Ethernet cable to the RJ45 port on the microphone and speaker bar.
3. Connect a CAT5e Ethernet cable to the network port on the back of the connect module.
4. Plug the CAT5e Ethernet cable into a network port (router, modem, wall jack).
5. Connect the provided power supply to the connect module and plug it into an outlet or a power bar.

![HDL310 connection diagram_04.24](https://cdn.document360.io/1ff82979-b9bd-4d03-9c0e-683bae60b79a/Images/Documentation/Copy%20of%20HDL310%20connection%20diagram_04.24.png)

- After it is powered up, the HDL310 system will automatically calibrate.
- Please remain quiet in the room until calibration is complete.
- After calibration, the HDL310 system may require an update.

## Connect a computer

To participate in an audio or video conference, a computer is required.

1. Connect the provided USB cable to the USB-B port on the connect module.
2. Run the cable to the computer and connect it to a USB-A port.

After the conference has finished, the computer can be disconnected from the connect module.

## Local device management

By connecting a USB cable from a system’s connect module to a computer, the HDL310 can be locally managed through the Nureva® App. This method is available as an alternative to managing the HDL310 over a local area network or direct Ethernet connection.

[Learn more](https://support.nureva.com/usb-connection-hdl310-systems) about using a USB connection with the HDL310 system.

## Overheating

- Do not block the vents on the connect module’s top, bottom or back.
- Ensure adequate space between all vents and other objects to promote airflow and cooling. These vents are required to keep the circuits from overheating.
- Avoid installing the connect module in a confined space.

![cm2_vent_locations_04.24](https://cdn.document360.io/1ff82979-b9bd-4d03-9c0e-683bae60b79a/Images/Documentation/Copy%20of%20Copy%20of%20cm2_vent_locations_04.24.png)

## Enrollment code

The HDL310 system is network-enabled, allowing easy enrollment into Nureva Console. An enrollment code is provided on a label found at the bottom of the connect module. It is recommended a note be made of the enrollment code before installing the connect module.

[Learn more](https://support.nureva.com/docs/enrolling-an-hdl310-system) about enrolling an HDL310 system.

![getting.started.write down the code_04.24](https://cdn.document360.io/1ff82979-b9bd-4d03-9c0e-683bae60b79a/Images/Documentation/Copy%20of%20Copy%20of%20getting.started.write%20down%20the%20code_04.24.png)

> [!NOTE]
> **Note:** This code is specific to the HDL310 system and cannot be used for other Nureva systems.