Adjusting the tracking area

CV30 camera
Last Updated: May 17th, 2022

The CV30 camera has three tracking area settings which can be selected through the settings menu. Choosing from Full, Top 2/3 or Top 1/2 settings will help determine how the camera looks for the person to track.


Full
The camera will look for a person to track within the full view of the camera. When the camera tracking is set to full there is a higher chance that a student's movement may be tracked.


Top 2/3 (Default)
The camera will look for a person who is visible in the top 2/3's of the full camera view.


Top half
The camera will look for a person who is visible in the top half of the full camera view.

NOTE: The images shown above are for representational purposes only.

Changing the tracking area setting

  • To view the on-screen display (OSD) the camera must be active
  • Open an application that accesses the camera
  • Once the camera application launches the camera view should be visible
    • If there are multiple cameras connected to the computer ensure that the CV30 is active
    • Press Menu on the remote to launch on the OSD
    • Navigate to Settings and press the Home button or the Right arrow on the remote to enter the settings section
    • Once in the settings, navigate to Tracking Area
    • Use the Left and Right arrows to change the tracking area
    • Once a mode is selected navigate to Back and press the Home button
    • Navigate to Exit and press the Home button





Was this article helpful?

Can’t find what you’re looking for?

Contact Support

1.844.370.2111