Adjusting the tracking modes

CV30 camera
Last Updated: May 13th, 2022

The CV30 camera has three tracking modes which can be selected through the settings menu. The number of people that you want to track will determine the mode to choose.

iDefault Mode

When the default mode is selected the CV30 camera tracks the first person that it identifies in the field of view (FOV). When there is more than one person in the FOV, you can choose the person that is being tracked with the right and left arrows on the remote control. If the people in the FOV overlap or are close to each other the camera may lose tracking or switch to the other person.

One person

  • Tracks the person detected in the FOV

Two people

  • Tracks the first detected or selected person
  • Switch the person being tracked using arrows on the remote control

Three people

  • Tracks the first detected or selected person
  • Switch the person being tracked using arrows on the remote control

NOTE:  The CV30 camera zooms out to the entire FOV when nobody is detected by the camera.

iMode 1

If the CV30 camera is set to Mode 1 the camera will track the first person that it identifies in the field of view (FOV). When there is more than one person in the FOV, you can choose the person that is being tracked with the right and left arrows on the remote control. If the people in the FOV overlap or are close to each other the camera will zoom out to cover all of the detected people.

One person

  • Tracks the person detected in the FOV

Two people

  • Tracks first detected person
  • Switch the person being tracked using arrows on the remote control
  • The selected person is tracked until they are no longer distinguished by the camera, then both people are tracked
  • If the selected person leaves the FOV, the camera will track the next detected person

Three people

  • Tracks first detected person
  • Switch the person being tracked using arrows on the remote control
  • The selected person is tracked until no longer being distinguished by the camera, then all three people are tracked
  • If the selected person leaves the FOV, the camera will track the remaining people in the FOV

NOTE:  The CV30 camera zooms out to the entire FOV when nobody is detected by the camera.

iMode 2

Selecting Mode 2 sets the CV30 camera's tracking to cover all detected people in the field of view (FOV). When Mode 2 is used the arrow keys do not switch between the people in the FOV.

One person

  • Tracks the person detected in the FOV

Two people

  • The camera covers the FOV tracking persons A and B

Three people

  • The camera covers the FOV tracking persons A, B and C

NOTE:  The CV30 camera zooms out to the entire FOV when nobody is detected by the camera.

iChanging the tracking mode setting

  • To view the on-screen display (OSD) the camera must be active
  • Open an application that accesses the camera
  • Once the camera application launches the camera view should be visible
    • If there are multiple cameras connected to the computer ensure that the CV30 is active
    • Press Menu on the remote to launch on the OSD
    • Navigate to Settings and press the Home button or the Right arrow on the remote to enter the settings section
    • Once in the settings, navigate to Tracking Mode
    • Use the Left and Right arrows to change the mode
    • Once a mode is selected navigate to Back and press the Home button
    • Navigate to Exit and press the Home button





Was this article helpful?

Can’t find what you’re looking for?

Contact Support

1.844.370.2111