Popular topics: Downloads Can I connect my computer wirelessly to the projector? HDL300 system installation guide Download Room Manager Room Manager features overview ► WM408i installation guide and drawings ► HDL300 system integration guide Microphone clearance requirements and recommendations More download options Does the HDL300 system work with audio conferencing (UC&C) software? Using the auxiliary ports on the HDL300 system Span Workspace technical requirements Installation guides and drawings Getting started with your HDL300 system HDL300 and Dual HDL300 system connection diagrams Installing a Dual HDL300 system Is the HDL300 system compatible with the Cisco® SX80? Can I switch between a single HDL300 and Dual HDL300 system? Copying and pasting onto the canvas Setting up Jira® for Span Workspace ►

HDL300 Mac® firmware updater instructions

To update the firmware of the HDL300 if it's connected to a Mac computer, follow the steps below.

Instructions

  1. Download the MacOS® updater .zip file from our Additional downloads page
  2. Double-click the .zip file to expand it's contents

  1. Open the firmware installer command file

  1. Type [y] and press [Enter]

The light on the HDL300 connect module will flash orange as the firmware update is installed. This process should take up to two minutes.

Once the upload is complete, the light will turn to solid green. The words "[process completed]" will appear in the command file.



Last updated: July 30, 2018

Was this article helpful?

Can’t find what you’re looking for?

Contact Support

1.844.370.2111