nureva.com
Contact us
Sign-in
Contents
x
Products
Ecosystem & Integrations
Powered by
Features & Updates
6 Articles
in this category
Print
Contents
Features & Updates
6 Articles
in this category
Understanding microphone and speaker bar status indicator lights
The colors of the status indicator lights on the microphone and speaker bar reflect different statuses. There are three brightness levels for the lights on the microphone and speaker bar: dim, bright and off. To change the brightness, press the F1 ...
Updated on : 22 Apr 2024
Voice Amplification Mode — HDL300 system
With Voice Amplification Mode, the Nureva
®
HDL300 system is connected to a wireless headset microphone. The presenter wearing the headset will then have an amplified voice in the room. The HDL300 system’s full-room audio pickup continues ...
Updated on : 14 Apr 2024
Active Zone Control with the HDL300 system
Active Zone Control with the Nureva
®
HDL300 system targets microphone pickup in a specific part of the room. Enabling Active Zone Control ensures that sound is heard clearly in the part of the room selected. For example, Active Zone...
Updated on : 22 Apr 2024
Understanding connect module status indicator lights
The Nureva
®
HDL300 system features status indicator lights on the back of the connect module. These lights can be used to help troubleshoot issues with the system and confirm the device is ready for use. Check the power light To dete...
Updated on : 22 Apr 2024
HDL300 system remote control functions and codes
The remote control allows users to: Answer and end calls. Adjust the call volume. Mute and unmute the call. Adjust the brightness of the status indicator lights on the microphone and speaker bar. Note: The remote control cannot be ...
Updated on : 29 Apr 2024
Firmware version 3.2.104 for HDL300 and Dual HDL300 systems
We’re pleased to announce that firmware version 3.2.104 is now available for Nureva
®
HDL300 and Dual HDL300 audio systems. The firmware can be updated using Nureva Console. This version of the firmware provides telemetry data changes and ...
Updated on : 06 May 2024