Popular topics: Downloads HDL300 installation guide and requirements ► Download Room Manager WM210i and WM307i installation guides and drawings WM408i installation guide and drawings ► Other downloads WM210i and WM307i technical requirements Room Manager features overview Enabling QuickShare on your canvas ► Span Workspace Projector user manual Creating your own template ► Image brightness and color correction Sharing your canvas ► Hardware and tools checklist Specification sheet Importing an image On-screen image alignment and touch calibration Using ready-to-use templates Adding a bookmark to your mobile home screen ►

About presence detect

The presence detect feature is designed to conserve energy by shutting the WM408i system down when it isn't in use. Presence detection tracks room motion up to five meters from the center of the touch panel.

There are two modes of presence detection:

  • Toggle ON/OFF – activates and deactivates the presence detection sensor. When this is toggled to ON the system will be activated when someone walks into a meeting room within 5 m (16') of the touch panel
  • Sleep timer – turns the system OFF when no motion is detected after a set amount of time. The sleep timer is adjustable between 5 to 60 minutes.
  • Reset – resets the presence detection feature to factory settings; the sensor will turn OFF.

Configure your presence detection settings in your Nureva Room Manager.



Last updated: November 21, 2018

Was this article helpful?

Can’t find what you’re looking for?

Contact Support

1.844.370.2111